PDA

View Full Version : Furman announces Smart Sequencer products



2ndRick
06-16-2011, 01:36 PM
Two models, with 15A and 20A capacity respectively.
These products are BlueBolt compatible with the optional RS-232 to Ethernet module.

https://lh4.googleusercontent.com/-K2ZJ2sjCynk/TfpL5lvzPpI/AAAAAAAAEro/6O0yyP4Idbo/s800/Fullscreen%252520capture%2525206162011%25252013028 %252520PM.jpg

https://lh5.googleusercontent.com/-TPPNXUCX_wk/TfpMj0tbG1I/AAAAAAAAEr4/dT_3g_CZcAg/s800/5731212561_4516b6271c_b.jpg
(shown with control covers removed)


Furman Launches SmartSequencer Models

At Booth 1325 Furman is demonstrating the CN-1800S (15 amp capacity) and CN- 2400S (20 amp capacity) SmartSequencers from its Contractor Series. The ultimate power solutions for commercial A/V installations of any size, from houses of worship to stadiums, the new CN-1800S and CN-2400S combine AC power distribution, protection, filtration, and sequential system power on/off in 1RU, 120VAC rackmount units.

The new Contractor Series products are the first to feature Furman’s SmartSequencing technology, which allows large and complex A/V systems to be safely powered on and off with a simple press of a button or turn of a key, even by non-technical personnel. SmartSequencing’s bidirectional communications between installed units enables a primary unit to control and sequence multiple secondary units, ensuring multi-zone electronic systems are powered on and off safely and dependably from a single control point across an entire installation.

Providing robust control options, the CN-1800S and CN-2400S are equipped with RS-232 ports and command sets for integration with control systems. An optional RS- 232-to-Ethernet adaptor (sold separately) adds full IP-addressability to the unit, allowing it to be controlled, programmed, and monitored from a smartphone, tablet, PC, or any Web-enabled device via Telnet, direct HTTP connection, or Panamax/ Furman’s BlueBOLT hosted remote power and energy management platform.

The CN-1800S and CN-2400S will be available in Q4 2011, while the RS-232-to-Ethernet adaptor (model # BB-RS232) will be available in Q1 2012.