PMuto
08-21-2013, 09:57 AM
Proprietary cable-wind, massive pay-out hole and heavily reinforced box eliminates headaches caused by common “fall-apart” boxes and tangled cable messes
Los Angeles, CA – August 21, 2013 – ICE Cable Systems (2013 CEDIA Expo Booth #1552) -- which serves integrators both directly and via more than 50 distributors in North America and internationally – is now shipping its new Big Mouth Payout (BMP) bulk wire & cable box. BMP incorporates four distinct design advantages that help the integrator run more efficiently on the jobsite.
4-inch payout hole and proprietary winding pattern
The BMP box combines a 4-inch payout hole with a proprietary cable-winding pattern. According to ICE president Brian Rizzo, the payout is more than twenty times larger than what’s currently available on the market today. “Our payout and wind pattern help eliminate everyday pull-problems like kinking, knotting, recoil and tangling. Removing these obstacles makes a one-man wire pull -- for example from atop a ladder -- significantly easier,” says Rizzo.
Ascending and descending foot-markers
Incorporated on the cable jackets are ascending and descending foot-markers which make it effortless for the integrator to identify how much cable has been used and how much remains. The result is optimal usage of the entire wind and the elimination of scrap; it also solves the common problem of tracking usage which according to Rizzo can often be difficult when more than one technician pulls from the same box.
Ultra-durable, weather resistant cardboard box with reinforced handles
To withstand abuse on the jobsite, the BMP box is comprised of an extremely durable water resistant cardboard along with dual-layer reinforced handles. According to Rizzo the cardboard is burst-tested to withstand 21 kilograms of force which far surpasses what is currently available in the channel today.
”BMP is a great example of ICE Cable’s understanding of what’s important to the integrator,” says Wally Whinna, principal of Allnet Distributing and board member of the Catalyst AV network, which distributes ICE Cable nationally. “Advantages like this make it easier for integrators to finish their pre-wire jobs faster and with less hassle.”
All box cables (category, speaker, coax, alarm, control, etc.) by ICE ship in a BMP box, many of which are available in runs as long as 1,000 feet.
For all ICE Cable Systems media inquiries please contact Paul Muto at 631.849.4301 or
paul@mutocomm.com.
About ICE Cable Systems
Founded in 2004 by president Brian Rizzo, ICE Cable Systems is a leading manufacturer of premium low-voltage wire and cable products serving the Audio Video, Alarm and Security, Commercial, Electrical Contracting and Data Center channels. The company’s products are available to integrators both directly and through more than 50 distributors in North America and internationally. ICE Cable’s success is driven by ingenuity and its desire to make superior products that offer more value to installers. www.icecable.com (http://www.icecable.com/)
Los Angeles, CA – August 21, 2013 – ICE Cable Systems (2013 CEDIA Expo Booth #1552) -- which serves integrators both directly and via more than 50 distributors in North America and internationally – is now shipping its new Big Mouth Payout (BMP) bulk wire & cable box. BMP incorporates four distinct design advantages that help the integrator run more efficiently on the jobsite.
4-inch payout hole and proprietary winding pattern
The BMP box combines a 4-inch payout hole with a proprietary cable-winding pattern. According to ICE president Brian Rizzo, the payout is more than twenty times larger than what’s currently available on the market today. “Our payout and wind pattern help eliminate everyday pull-problems like kinking, knotting, recoil and tangling. Removing these obstacles makes a one-man wire pull -- for example from atop a ladder -- significantly easier,” says Rizzo.
Ascending and descending foot-markers
Incorporated on the cable jackets are ascending and descending foot-markers which make it effortless for the integrator to identify how much cable has been used and how much remains. The result is optimal usage of the entire wind and the elimination of scrap; it also solves the common problem of tracking usage which according to Rizzo can often be difficult when more than one technician pulls from the same box.
Ultra-durable, weather resistant cardboard box with reinforced handles
To withstand abuse on the jobsite, the BMP box is comprised of an extremely durable water resistant cardboard along with dual-layer reinforced handles. According to Rizzo the cardboard is burst-tested to withstand 21 kilograms of force which far surpasses what is currently available in the channel today.
”BMP is a great example of ICE Cable’s understanding of what’s important to the integrator,” says Wally Whinna, principal of Allnet Distributing and board member of the Catalyst AV network, which distributes ICE Cable nationally. “Advantages like this make it easier for integrators to finish their pre-wire jobs faster and with less hassle.”
All box cables (category, speaker, coax, alarm, control, etc.) by ICE ship in a BMP box, many of which are available in runs as long as 1,000 feet.
For all ICE Cable Systems media inquiries please contact Paul Muto at 631.849.4301 or
paul@mutocomm.com.
About ICE Cable Systems
Founded in 2004 by president Brian Rizzo, ICE Cable Systems is a leading manufacturer of premium low-voltage wire and cable products serving the Audio Video, Alarm and Security, Commercial, Electrical Contracting and Data Center channels. The company’s products are available to integrators both directly and through more than 50 distributors in North America and internationally. ICE Cable’s success is driven by ingenuity and its desire to make superior products that offer more value to installers. www.icecable.com (http://www.icecable.com/)