PDA

View Full Version : Upscaling DVD player with a Fuji P50XHA40US?



PAAI
08-11-2005, 02:16 PM
I am creating a system with some Plasma options for my client. Good-Better_best Scenario for a family room entertainment system.

I have between a PAnny S97 or Denon 2910 in budget.
I don't think the HDMI output is going to work with the DVI input on the Fuji, like it would on the LG or PAnny. The Current spec for the DVI on the Fuji is for Computer use only.

I have not connected a Upscaling DVD player to the P50ZHA40US, but I have to the Panny 50" with no problems. Have you tried to compare to see which video processor is better?

Any thoughts or experience you wish to share?

Greg_C
08-11-2005, 02:44 PM
I have used the HDMI out of a Denon 1910 into a 40 series several times. The DVI input is strictly computer.

PAAI
08-11-2005, 02:52 PM
I almost that Video 5 HDMI on the farthest side of the fuji :)

Did you do a 408p over HMDI or go over to 720P from the output of the denon?

any HDMI issues with two pieces that you encountered?

Greg_C
08-11-2005, 03:28 PM
Ran it at 720. No problems with the handshake between units.

vwpower44
08-17-2005, 04:41 PM
Ran the denon 2910 at 720p on the 40 series 50 and 55 inch. Great picture. No HDMI problems. HDMI cable problems. I hav had several bad right out of the box. munster...

Mike