Since 2003 IntegrationPros has been the social network for professionals in the systems integration and custom installation industry... if that's you, get started by creating an account.


IP Ads


Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28
  1. Gary's Avatar
    Gary is offline Site Owner
    Site Admin
    Super Hero
    Sr. Professional Installer
    Array
    Join Date
    Jan 2005
    Location
    the STL
    Posts
    3,851

    Jump to Comments

    Crestron Connected Receiver

    27 Comments by Gary Published on 05-08-2014 04:22 PM
    So I did my first Crestron connected receiver and I'm pretty impressed.

    All of the issues I had revolved around getting everything setup. The setup instructions walk you through getting the receiver into installer setup mode. To do this there is a combination of buttons you press while the receiver is off. The instructions lead you to believe that this will bring up the installer menu, it does not. It turns the receiver on and when you press the setup button on the remote the Crestron setup option is in the menu. On the next power cycle the setup menu goes back to normal. This took me more time than I care to admit to figure out out, so hopefully this saves you guys some time.

    Setting the unit up is just like any other Crestron network device, the unit gets an IP ID and you enter the IP address of the processor. For some reason I couldn't get the receiver to communicate with the processor until I gave it (the receiver) a fixed IP address even though it showed online. YMMV

    From a programing stand point it's just like the SWAMP or C2N-AMP-4x100.

    Attachment 4808

    The only real problem I had was that there is no listing of what analogs switch which sources, five minutes in debugger and all was well.

    Attachment 4809

    In addition I used the zone 2 out to feed the media player to a PAD8 as a music source.



    This has all been in and working without any complaints for about 2 weeks.

    -----Update---- the setup instructions can be found here, http://support.crestron.com/app/answ...id/5467/kw/avr

  2. Total Comments 27

    Comments

  3. #21
    Senior Member
    Senior Member
    kgossen's Avatar
    Join Date
    Feb 2009
    Location
    kelowna, BC
    Posts
    1,202
    Thumbs Up/Down
    Received: 74/3
    Given: 75/1

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    On X3000 in order starting at input 1

    CD
    Tuner
    DVD
    BD
    TV Audio
    CBL/SAT
    Media Player
    Game
    Aux
    USB/iPod
    Favorites
    iRadio
    Pandora
    SiriusXM
    Spotify
    Server
    Flickr

  4. #22
    Senior Member
    Full Time Member

    Join Date
    Apr 2005
    Location
    Atlanta, GA
    Posts
    555
    Thumbs Up/Down
    Received: 19/0
    Given: 29/0

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    Awesome, KG. Thanks!
    Integrated Systems Programming, Consultation, and Design

  5. #23
    Senior Member
    Full Time Member

    Join Date
    Apr 2005
    Location
    Atlanta, GA
    Posts
    555
    Thumbs Up/Down
    Received: 19/0
    Given: 29/0

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    Quote Originally Posted by Gary View Post
    I didn't write them down but I also did it remotely, just put a signal on the input name feedback serial output and change the inputs in debugger and you can see the input name.
    Yes, I had thought of that, but don't have remote access to the system
    Integrated Systems Programming, Consultation, and Design

  6. #24
    ElectroOptical Acoustical
    Sr. Professional Installer
    PAAI's Avatar
    Join Date
    Jan 2005
    Location
    wire nuttville
    Posts
    8,486
    Thumbs Up/Down
    Received: 112/2
    Given: 422/1

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    I added the preamp (AV7701) to the project after fumbling through it,but I have no control. Just trying to power on and off.
    After doing the special installer menu dance (left cursor, back and power together), I made it to the menu and selected Crestron Connected. set the IP address, Crestron ID and left the port default. There was no SAVE/ RETURN buttons at the bottom of the marantz screen as shown from Crestron tech notes.
    Not sure what to do next.
    I finally quit drinking for good. Now, I do it for evil.

  7. #25
    Site Owner
    Site Admin
    Super Hero
    Sr. Professional Installer
    Gary's Avatar
    Join Date
    Jan 2005
    Location
    the STL
    Posts
    3,851
    Thumbs Up/Down
    Received: 65/27
    Given: 207/1

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    Quote Originally Posted by PAAI View Post
    I added the preamp (AV7701) to the project after fumbling through it,but I have no control. Just trying to power on and off.
    After doing the special installer menu dance (left cursor, back and power together), I made it to the menu and selected Crestron Connected. set the IP address, Crestron ID and left the port default. There was no SAVE/ RETURN buttons at the bottom of the marantz screen as shown from Crestron tech notes.
    Not sure what to do next.
    The first one I did would not work until I gave the receiver a fixed IP address, not sure why and YMMV.
    Your donations support this site!

    "The whole aim of practical politics is to keep the populace alarmed, and hence clamorous to be led to safety, by menacing it with an endless series of hobgoblins, all of them imaginary." H.L. Mencken

    "Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats." H. L. Mencken

    G Miller Designs-Propose/Design/Program

    Now taking on new programming clients, PM me for info

  8. #26
    ElectroOptical Acoustical
    Sr. Professional Installer
    PAAI's Avatar
    Join Date
    Jan 2005
    Location
    wire nuttville
    Posts
    8,486
    Thumbs Up/Down
    Received: 112/2
    Given: 422/1

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    Thanks Gary. I will give it a try when I get home.
    I finally quit drinking for good. Now, I do it for evil.

  9. #27
    ElectroOptical Acoustical
    Sr. Professional Installer
    PAAI's Avatar
    Join Date
    Jan 2005
    Location
    wire nuttville
    Posts
    8,486
    Thumbs Up/Down
    Received: 112/2
    Given: 422/1

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    Having some IP control problems with the new AV7702.
    Marantz CI Portal says nothing has changed in the control part on this preamp.
    I am going to remove the DNS entrys as instructed on the serial/IP control protocol sheet and see if that helps.
    I can get to it with a browser on port 80, but no control from port 23. Serial works fine.
    I finally quit drinking for good. Now, I do it for evil.

  10. #28
    Senior Member
    Senior Member
    dplanz's Avatar
    Join Date
    Feb 2007
    Location
    Kelowna, B.C., Canada
    Posts
    913
    Thumbs Up/Down
    Received: 16/0
    Given: 81/0

    0 Not allowed! Not allowed!

    Re: Crestron Connected Receiver

    As of 2021, Marantz AVRs no longer support Crestron Connected. Specifically, I'm working with an SR7015, but it is apparently an across the product line drop.....
    http://www.integrationpros.org/forums/image.php?type=sigpic&userid=1020&dateline=1352158  210

 

 
Page 3 of 3 FirstFirst 123

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Advertise With Us?